Fluke Versiv Series - MPO Tip Attachment

Chapter 5: FiberInspector™ Pro Tests
FI-3000 Probe Setup
107
MPO Tip Attachment
Attach the tip to the Probe with the key in the desired position.
To learn more about key position, see “MPO Key Position”.
To attach a tip:
1 Align the slot in the tip with the alignment pin on the end of
th
e Probe. See Figure 43.
2 Turn the s
ilver ring on the Probe to secure the tip to the
Probe.
Figure 43. MPO Tip Attachment
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com