Versiv Series Cabling Certification Product Family
Users Manual
346
How to See the Tester’s MAC Address
Some networks require users to register their device’s MAC
address before they can connect to the network.
There are two MAC addresses: one for the wired port and one for
Wi-Fi.
Versiv 2 testers have an internal Wi-Fi radio. Versiv testers use an
external adapter to connect to Wi-Fi networks.
To see the tester’s MAC address
1 For a Versiv that uses an external Wi-Fi adapter, connect the
adapter to the tester’s USB port.
2 On the home screen tap TOOLS, then tap Network.
3 On the NETWORK screen, tap the Wired or Wi-Fi panel. The
MAC addresses shows at the top of the WIRED and WI-FI PORT
screens.
Use LinkWare Live Through a Wired Ethernet
Network
1 Use an appropriate cable to connect the tester’s RJ45 Ethernet
port to an active network port. If the cable is good and the
port is active, the LEDs on the tester’s port will come on.
2 On the home screen, make sure the Operator name is correct.
The tester uses the email address associated with the operator
name as the ID when you sign in to LinkWare Live.
If no address is associated with the name, or if you enter a
different address on the LWL SIGN IN screen, the tester associates
the name with the address you enter.
3 On the home screen, tap the SYNC icon.
4 When the tester connects to the network, the wired network
connection icon shows at the top of the screen:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
