Get Acquainted
AC Adapter and Battery
13
• Use only Fluke Networks approved power adapters
to supply power to the Product and charge the
battery.
• Charge the battery indoors.
• If the Product gets hot, disconnect the battery
charger and move the Product to a cool, non-
flammable location.
• Replace the rechargeable battery after 5 years of
moderate use or 2 years of heavy use. Moderate use
is defined as recharged twice a week. Heavy use is
defined as discharged to cutoff and recharged daily.
To replace the battery, send the Product to an
authorized Fluke Networks Service Center.
• Have an approved technician repair the Product.
• Do not open the case. You cannot repair or replace
parts in the case.
AC Adapter and Battery
You can use the AC adapter (model PWR-SPLY-30W) or the
lithium ion battery (model VERSIV-BATTERY) to supply power to
the tester.
To remove the battery, see “Remove the Battery” on page 366.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
