Fluke Versiv Series - How to Remove or Install a Module

Versiv Series Cabling Certification Product Family
Users Manual
26
To turn the Auto Save function on or off
1 On the home screen, tap the Next ID panel.
2 On the CHANGE ID screen, tap the On/Off control next to
Auto Save.
3 Tap DONE.
How to Install a Strap
Two types of straps are available for the tester: a hand strap that
helps you hold the tester, and an optional carrying strap that lets
you carry and hang the tester. Figure 5 shows how to install a
strap and how to use the hand strap.
GPU43.EPS
Figure 5. How to Install a Strap and Use the Hand Strap
How to Remove or Install a Module
Figure 6 shows how to remove and install the module.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com