Fluke Versiv Series - Autotest Results for Loopback Mode

Versiv Series Cabling Certification Product Family
Users Manual
172
3-6 If Auto Save is on, the tester uses the next ID to save the
results.
If Auto Save is off, the SAVE RESULT screen shows the next
ID available. You can change the ID if necessary.
Autotest Results for Loopback Mode
Figure 65 shows an example of Autotest results for Loopback
mode.
GPU119.EPS
Figure 65. Result for Loopback Mode
D
G
E
F
A
B
C
H
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com