Manage Test Results
How to Add a Result to a Saved Result
327
These icons show when you connect the tester to a network
to use Fluke Networks cloud services (see Chapter 14):
The tester is connected to a wireless network.
The tester is connected to a wired network.
The asset management icon shows when the owner of a
LinkWare Live account has enabled the asset management
service on the tester. “About the Asset Management Service” on
page 352.
How to Add a Result to a Saved Result
You can save the results from different tests in one cable ID. For
example, you can save CertiFiber Pro results and FiberInspector
results together in one ID.
When you add results, these settings used to get the results must
agree with the settings in the saved result:
• Test limit
• Fiber categories (single-mode/multimode, core size, category)
• Index of refraction (makes a warning you can override)
If the settings do not agree, the tester shows a warning.
To add results for a different End setting
1 Do the t
est, then tap SAVE.
2 On the SAVE RE
SULT screen, select End 1 or End 2, make sure
the Cable ID and End name are correct, then tap SAVE.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
