Versiv Series Cabling Certification Product Family
Users Manual
18
To see more information about a remote’s battery status
1 Make the connections shown in Figure 2 and turn on both
testers.
2 For CertiFiber Pro testers, select Smart Remote or Loopback
mode.
3 Make sure the connection icon shows at the top of the screen
().
4 Tap TOOLS, then tap Battery Status.
When the AC adapter is not connected, the screen shows the
Time Remaining, which is the approximate battery life at the
present rate of use.
Verify Operation
The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to “If the Tester Does Not
Operate as Usual” on page 367.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
