Fluke Versiv Series - How to Quickly Change OTDR Settings after a Test

Use the HDR OTDR
How to Quickly Change OTDR Settings After a Test
277
How to Quickly Change OTDR Settings After a
Test
After an OTDR test, you can quickly change some OTDR settings
when you want to try different settings on the same fiber. After
you do a test, tap SETUP on the TRACE screen, then select settings
on the MANUAL PON OTDR (Figure 105) or MANUAL OTDR
screen.
GPU221.EPS
Figure 105. Manual PON OTDR Screen for Quick Changes After a Test
A
C D
E
B
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com