Versiv Series Cabling Certification Product Family
Users Manual
278
You can save your settings to the Active test setup or to a New
test setup, or you can tap TEST to do a test without saving the
settings.
Tap the settings you want. You can scroll some columns to see
more settings. For descriptions of the settings, see the
Technical Reference Handbook.
Select the wavelengths to use for the test.
Tap CURRENT to see the settings the tester used for the last test.
The SAVE SETUP button lets you save your settings:
Active: The tester saves the settings in the active test setup. If
the test was not a Manual test, the tester changes the active
Test Type to Manual.
New: The tester saves the settings in a new test setup that is
added to the project. The new setup is a Manual PON OTDR
test or a Manual OTDR test.
If you save your settings in a new test setup:
The tester uses your settings until you save the results or exit
the results screen then start a test from the home screen.
Then the tester uses the test setup it had before you changed
the settings.
If you do not save your settings:
The tester uses your settings until you save the results or exit the
results screen then start a test from the home screen. Then the
tester uses the test setup it had before you changed the settings.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
