Get Acquainted
Safety Information
9
WCaution
To prevent damage to the tester or cables under
test, to prevent data loss, and to make sure your
test results are as accurate as possible:
• Do not connect the tester to an active network.
Doing so causes unreliable test results, can disrupt
network operations, and can cause damage to the
tester.
• Connect to the adapters only plugs that are made
for Ethernet applications, such as RJ45, ARJ45, and
Cat 7 plugs. Other types of plugs, such as RJ11
(telephone) plugs, can cause permanent damage to
the jacks.
• To make sure your test results are as accurate as
possible, do the reference procedure every 30 days.
See “Set the Reference” on page 43.
• Do not operate portable transmitting devices, such
as walkie-talkies and cell phones, during a cable
test. Doing so can cause errors in test results.
• For permanent link adapters, do not twist, pull on,
pinch, crush, or make kinks in the cables. See Figure
10 on page 36.
For CertiFiber Pro OLTS Modules
WWarning: Class 1 and Class 2 Laser Products
*
To prevent possible eye damage caused by
hazardous radiation:
• Do not look directly into optical connectors. Some
optical equipment emits invisible radiation that can
cause permanent damage to your eyes.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
