Fluke Versiv Series - How to Quickly Change OTDR Settings after a Test

Versiv Series Cabling Certification Product Family
Users Manual
224
How to Quickly Change OTDR Settings After a Test
After an OTDR test, you can quickly change some OTDR settings
when you want to try different settings on the same fiber. After
you do a test, tap SETUP on the TRACE screen, then select settings
on the MANUAL OTDR screen (Figure 85).
You can save your settings to the Active test setup or to a New
test setup, or you can tap TEST to do a test without saving the
settings.
GPU220.EPS
Figure 85. Manual OTDR Screen for Quick Changes After a Test
A
C D
E
B
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com