Versiv Series Cabling Certification Product Family
Users Manual
16
Check the Battery Status
On a main tester
The battery status icon is in the upper-left corner of the screen:
Battery is full. The LED stays red for a few minutes after the
battery status icons show that the battery is fully charged.
Battery is approximately half full.
If the AC adapter is not connected, the red bar shows that
the battery is low. Connect the AC adapter to charge the
battery and make sure the tester continues to operate.
The red bar also shows if the AC adapter is connected, but
the battery is not installed.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
