Versiv Series Cabling Certification Product Family
Users Manual
12
• Do not connect APC (angled physical contact)
connectors to the OptiFiber Pro OTDR ports. Do not
connect PC or UPC connectors to the OptiFiber Pro
HDR OTDR ports. Doing so can damage the port’s
endface, and the large reflection at the OTDR port
can cause unreliable test results.
• Use proper cleaning procedures to clean all fiber
connectors before every use. Neglecting this step or
using improper procedures can cause unreliable test
results and may permanently damage the
connectors. See Chapter 4.
• Use a video probe to periodically inspect the OTDR
connectors for scratches and other damage.
• Read the instructions for splice machines before
using the OTDR to monitor splicing procedures. The
OTDR can interfere with the light injection detection
techniques used by some splicers.
For FiberInspector Pro Video Probes
WWarningX
To prevent possible electrical shock, fire, or personal
injury and for safe operation of the Product:
• Read all safety information before you use the
Product.
• Carefully read all instructions.
• Do not alter the Product and use only as specified,
or the protection supplied by the Product can be
compromised.
• Do not use the Product if it operates incorrectly.
• Do not use the Product if it is altered or damaged.
• Disable the Product if it is damaged.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
