Versiv Series Cabling Certification Product Family
Users Manual
116
RESULTS: Tap RESULTS to see and manage the results that are
saved in the tester.
SYNC: Tap SYNC to upload results to LinkWare Live. See
Chapter 14.
TEST: Tap TEST to do the test shown in the test setup panel.
The percentage of the tests in the project that are completed.
The tester uses the number of available IDs and the tests you
selected on the CABLE ID SETUP screen to calculate this
percentage. See Figure 128 on page 341. % Tested does not
show if your project contains only a Next ID list. For more
information about the Next ID list, see the Versiv Technical
Reference Handbook
The type of module attached to the tester. For the blank
module that comes with the FI2-7300 or FI2-7300-NW kit,
HOME shows.
The asset management icon shows when the owner of a
LinkWare Live account enables the asset management service for
the tester. See “Sign Your Tester Out of LinkWare Live”.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
