Chapter 5: FiberInspector™ Pro Tests
Home Screen for FiberInspector Pro Tests
115
Tap Next ID to do these tasks:
• Enter an ID, select a different ID in the ID set, select a
different set of IDs, or make a new set. The tester adds the
IDs and ID sets you make to the project that shows on the
home screen.
• Turn on or off Auto Save.
• For OTDR or FiberInspector tests:
Select End 1 or End 2.
Enter a name for End 1 and End 2.
Operator: The name of the person who does the job. You can
enter a maximum of 20 operator names. For each operator you
can also enter the email address that the operator will use as an
ID to sign in to LinkWare Live.
TOOLS: The TOOLS menu lets you set up the compensation
function for the launch/tail cords, use tools such as the real-
time trace and the FiberInspector test, see the status of the
tester, and set user preferences such as the language and the
display brightness.
Note
The installed module determines which functions
show in the TOOLS menu.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
