Use the OTDR
The OptiFiber Pro Home Screen
197
TOOLS: The TOOLS menu lets you set up the compensation
function for the launch/tail cords, use tools such as the real-time
trace and the FiberInspector test, see the status of the tester, and
set user preferences such as the language and the display
brightness.
SET COMP: Lets you select a launch method and set the lengths
of launch and tail cords. SeeAbout Launch and Tail Cords on
page 202.
RESULTS: Tap RESULTS to see and manage the results that are
saved in the tester.
SYNC: Tap SYNC to sync projects with LinkWare Live.
TEST: Tap TEST to do the test shown in the test setup panel.The
percentage of the tests in the project that are completed.
% Tested: The tester uses the number of available IDs and the
tests you selected on the CABLE ID SETUP screen to calculate this
percentage. See Figure 128 on page 341.
% Tested does not show if your project contains only a Next ID
list. See “About Next ID Sets” on page 340 for more information
about the Next ID list.
The type of module attached to the tester. If no module is
attached, this screen shows HOME.
The asset management icon shows when the owner of a
LinkWare Live account has enabled the asset management
service on the tester. “About the Asset Management Service” on
page 352.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
