Versiv Series Cabling Certification Product Family
Users Manual
218
GPU22.EPS
Figure 82. EventMap Example 2
: One or more measurements for the event exceeds the limit.
: A bend with loss that exceeds a macrobend threshold. If
Macrobend Detection is Off, the EventMap shows the blue
circle shown above. Macrobend detection is available only for
single-mode fibers.
Note
A bend always causes a FAIL result. If you want a
PASS result for a link that has a bend, turn off
Macrobend Detection.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
