Fluke Versiv Series - Page 250

Use the OTDR
The SmartLoop Test
241
GPU176.EPS
Figure 93. SmartLoop Test Connections for a Bi-Directional Test
UPC UPC
Launch
cord
Loopback cord
(Tail Cord for Fiber A
and Launch Cord for
Fiber B)
Tail
cord
Fiber link
Connections for
End 1
Connections for
End 2
Launch
cord
Tail
cord
Loopback cord
(Tail Cord for Fiber B
and Launch Cord for
Fiber A)
OTDR Port event
for Fiber B
OTDR Port event
for fiber A
End event
for Fiber A
End event
for Fiber B
Fiber A Fiber B
Fiber A Fiber B
* Recommended for bi-directional tests to protect the OTDR port
from wear. These cords are available from Fluke Networks.
Optional OTDR
Port protector
patch cord*
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com