Use the OTDR
The SmartLoop Test
243
• The Port Connection Quality in the averaged results is the
rating from End 1.
• The tester does not calculate averaged results in some
situations, for example if a launch, tail, or loopback cord was
not detected or if the distance to the end was not the same in
both directions.
GPU197.EPS
Figure 94. EventMap for Averaged, Bi-directional SmartLoop Results
The purple fiber is the loopback cord.
The longest segment length of the two directions.
Tap this button to see the results for the other fiber (A or B).
Touch for 3 seconds to see a summary of the results from
ends 1 and 2 on fibers A and B. To see the EventMap for a
result in the list, tap the result.
A
B
I
G
C
D
F
H
E
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
