Fluke Versiv Series - Page 300

Use the HDR OTDR
The SmartLoop Test
291
GPU217.EPS
Figure 111. SmartLoop Test Connections
APC
Launch cord
Loopback cord
(Tail Cord for Fiber A and
Launch Cord for Fiber B)
Tail cord
Fiber link
OTDR Port event for
Fiber B
End event for Fiber A
Fiber
A
Fiber
B
Optional OTDR
Port protector
patch cord*
(30 cm, 12 in)
* Optional for tests in one direction. Recommended for bi-directional
tests to protect the OTDR port from wear. These cords are available
from Fluke Networks.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com