Manage Test Results
View Saved Results
325
The name of the active project.
: The number of results that passed. This includes
individual results for each ID and tests that have an result.
: The number of results that failed. This includes individual
results for each ID.
: The number of DSX CableAnalyzer results that have PASS*
results. PASS* results have measurements within the range of
accuracy uncertainty for the tester. See “PASS*/FAIL* Results” on
page 61.
Note
IDs can contain multiple results. So, these numbers
can be more than the number of IDs saved.
The cable IDs that have FAIL results and must be tested again.
Because some IDs can have one or more tests that failed, the
number at the top of this screen (
) can be more than the
number of retests needed.
The cable IDs that have an overall PASS or result. Because
some IDs can have one or more tests that passed or have an
status, the number at the top of this screen (
) can be more
than the number of passes.
IDs that start with “TRC” are from verification tests on fiber
test reference cords. These IDs show the date and time of the
test.
Tap VIEW ALL to see a summary of the results in all the projects
in the tester.
TRANSFER lets you export or import results to or from a flash
drive and delete results on the flash drive. The TRANSFER
function also lets you sync project setups and results with
LinkWare Live.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
