Versiv Series Cabling Certification Product Family
Users Manual
354
Table 10. Settings for the Wi-Fi Connection
Setting Description
Address
Most networks use DHCP.
DHCP
address
settings
SSID: The tester does a scan for wireless networks and shows a
list of available networks. Select the correct SSID.
To connect to a hidden network, tap ADD SSID.
Security:
• Authentication: Select the authentication type that the
network uses:
Open: Security credentials are not necessary.
WEP: Select an encryption method and enter the
necessary keys.
WPA/WPA2 Personal: Enter the password for the
network.
• WPA/WPA2 Enterprise:
EAP: Select an EAP type that is appropriate for the
authentication server.
User and Password: Enter a user name (login name) and
password for the network.
Alternate ID: The tester can use the Alternate ID with
some EAP methods to send an empty or anonymous
identity while the tester makes a private connection. The
tester then uses the private connection to send the User
name and Password you entered.
The tester can also use the Alternate ID to send the User
name and Password to an authentication server in a
different realm. In this situation, the Alternate ID can
have a format such as anonymous@MyCompany.com or /
MyCompany/anonymous.
Static
address
settings
Enter an IP address for the tester and the Subnet Mask,
Gateway address, and DNS1 and DNS2 addresses for the
network. If you are not sure what to enter, speak to the
network administrator.
The Security settings are the same as for the DHCP address
settings.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
