EasyManuals Logo

Fortinet FortiGate Series Administration Guide

Fortinet FortiGate Series
764 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #376 background imageLoading...
Page #376 background image
Bi-directional Forwarding Detection (BFD) Router Dynamic
FortiGate Version 4.0 MR1 Administration Guide
376 01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
set bfd enable
set bfd-desired-min-tx 50
set bfd-required-min-rx 50
set bfd-detect-mult 3
set bfd-dont-enforce-src-port disable
end
Disabling BFD for a specific interface
The previous example enables BFD for your entire FortiGate unit. If an interface is not
connected to any BFD enabled routers, you can reduce network traffic by disabling BFD
for that interface. For this example, BFD is disabled for the internal interface using CLI
commands.
config system interface
edit <interface>
set bfd disable
end
Configuring BFD on BGP
Configuring BFD on a BGP network involves only one step— enable BFD globally and
then disable it for each neighbor that is running the protocol.
config system settings
set bfd enable
end
config router bgp
config neighbor
edit <ip_address>
set bfd disable
end
end
Configuring BFD on OSPF
Configuring BFD on an OSPF network is very much like enabling BFD on your unit—you
can enable it globally for OSPF, and you can override the global settings at the interface
level.
To enable BFD on OSPF:
configure routing OSPF
set bfd enable
end
To override BFD on an interface:
configure routing OSPF
configure ospf-interface
edit <interface_name>
set bfd disable
end
end
Note: The minimum receive interval (bfd-required-min-rx) and the detection
multiplier (bfd-detect-mult) combine to determine how long a period your unit will wait
for a reply before declaring the neighbor down. The correct value for your situation will vary
based on the size of your network and the speed of your unit’s CPU. The numbers used in
this example may not work for your network.

Table of Contents

Other manuals for Fortinet FortiGate Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fortinet FortiGate Series and is the answer not in the manual?

Fortinet FortiGate Series Specifications

General IconGeneral
ModelFortiGate Series
CategoryFirewall
ThroughputVaries by model
InterfacesVaries by model
Concurrent SessionsVaries by model
VPN SupportYes
High AvailabilityYes
Firewall ThroughputVaries by model
VPN ThroughputVaries by model
IPS ThroughputVaries by model
NGFW ThroughputVaries by model
Threat Protection ThroughputVaries by model
New Sessions per SecondVaries by model
Power SupplyVaries by model
Security FeaturesFirewall, IPS, Application Control, Web Filtering, Antivirus, VPN
Virtual DomainsYes
Form FactorDesktop, Rackmount

Related product manuals