Router Dynamic Customizable routing widgets
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903 381
http://docs.fortinet.com/ • Feedback
• If no matching rule is found, no changes are made to the routing information.
• When more than one match-* rule is defined, all of the defined match-* rules must
evaluate to TRUE or the routing information is not changed.
• If no match-* rules are defined, the FortiGate unit makes changes to the routing
information only when all of the default match-* rules happen to match the attributes of
the route.
The default rule in the route map (which the FortiGate unit applies last) denies all routes.
For a route map to take effect, it must be called by a FortiGate unit routing process.
Figure 203: Route Map GUI widget
For more information on the route map, see the “router” chapter of the FortiGate CLI
Reference.
Route-map Enter the name of a new route-map. Select Add to save the new route-
map.
Name The name of the route map, or the number of the prefix entry.
Action The action of the route map. Actions can be permit or deny.
Rules The rules include the criteria to match and a value to set. The criteria to
match can be an interface, address from access or prefix list, the next-hop
to match from access or prefix list, a metrics, or other information. The
value to set can be the next-hop IP address, the metric, metric type, and a
tag number.
Delete Icon Select to remove a route map or entry.
Add Icon Select to add a route map entry to a route map.
Edit Icon Select to edit an existing route map entry.