What’s new in FortiOS Version 4.0 MR1 Dynamic routing for IPv6 traffic
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903 57
http://docs.fortinet.com/ • Feedback
Variable Description Default
edit <prefix_list_name> Enter a name for the prefix list. A prefix list and
an access list cannot have the same name.
No default.
config rule Variables
edit <prefix_rule_id> Enter an entry number for the rule. The number
must be an integer.
No default.
action {deny | permit} Set the action to take for this prefix. permit
comments <string> Enter a description of this access list entry. The
description can be up to 127 characters long.
ge <length_integer> Match prefix lengths that are greater than or
equal to this number. The setting for ge should
be less than the setting for le. The setting for
ge should be greater than the netmask set for
prefix. length_integer can be any
number from 0 to 128.
Null
le <length_integer> Match prefix lengths that are less than or equal
to this number. The setting for le should be
greater than the setting for ge.
length_integer can be any number from 0
to 128.
Null
prefix6
{<address_ipv6mask> | any}
Enter the prefix (IP address and netmask) for
this prefix list rule or enter any to match any
prefix. The length of the netmask should be less
than the setting for ge. If prefix is set to any, ge
and le should not be set.
::/0