Data Leak Prevention DLP archiving
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903 591
http://docs.fortinet.com/ • Feedback
Figure 363: The All_HTTP sensor with Archive set to Full
8 Go to Firewall > Policy > Protection Profile and add a new or edit a protection profile.
9 Select the Data Leak Prevention Sensor expand arrow.
10 Select Data Leak Prevention Sensor and select the Content_Archive sensor from the
list.
Figure 364: Adding the Content_Archive DLP sensor to a protection profile
11 Add the protection profile to a firewall policy that accepts HTTP and HTTPS traffic.
To DLP archive all email messages that contain the string “confidential”
This procedure describes how to add a DLP rule that finds the string “confidential” in the
body of POP3, IMAP, and SMTP email messages. To archive all email messages that
contain this string you must add the DLP rule to a DLP sensor and configure the sensor for
full DLP archiving.
1 Go to UTM > Data Leak Prevention > Rule and add a rule to find the string
“confidential” in POP3, SMTP, and IMAP email messages.
To Next Page
Loading...
