Configuring Alert Email Log&Report
FortiGate Version 4.0 MR1 Administration Guide
716 01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
Figure 444: Alert Email options
SMTP Server The name/address of the SMTP email server.
Email from The SMTP user name.
Email to Enter up to three email address recipients for the alert email message.
Authentication Select the authentication Enable check box to enable SMTP
authentication.
SMTP user Enter the user name for logging on to the SMTP server to send alert
email messages. You need to do this only if you have enabled the
SMTP authentication.
Password Enter the password for logging on to the SMTP server to send alert
email. You need to do this only if you selected SMTP authentication.
Send alert email for the
following
Select to have the alert email sent for one or multiple events that
occur, such as an administrator logging in and out.
Interval Time
(1-9999 minutes)
Enter the minimum time interval between consecutive alert emails.
Use this to rate-limit the volume of alert emails.
Intrusion detected Select if you require an alert email message based on attempted
intrusion detection.
Virus detected Select if you require an alert email message based on virus detection.
Web access blocked Select if you require an alert email message based on blocked web
sites that were accessed.
HA status changes Select if you require an alert email message based on HA status
changes.