freightliner Sprinter Operator's Manual

Operating system with steering wheel buttons
99
Controls in detail
E If you have not yet entered the PIN
code, enter the PIN using the cell
phone or audio system.
The cell phone searches for a network.
The display remains blank during this
time.
As soon as the cell phone has found a
network, you will see the
Ready mes-
sage or the name of the network pro-
vider (if available) in the display.
Once it has shown its operational readi-
ness, you can operate the cell phone using
the operating system.
i If the operational readiness symbol goes
out, your vehicle is outside the transmission/
reception range. The message No Service is
displayed.
Accepting a call
You can accept a call at any time, provided
that the cell phone is ready to receive calls.
E Press the 6 button.
The call duration is shown in the dis-
play.
Ending or rejecting a call
E Press the ~ button.
The caller then hears the busy signal.
The display now shows the operational
readiness symbol again.
Dialing a number from the phone book
You may select and dial a number from the
phone book at any time, provided that the
cell phone is ready to receive calls.
i It is only possible to create new phone num-
ber entries in the phone book using the cell
phone itself. See the separate Operating Instruc-
tions.
E Press the V or U button repeat-
edly until you see the TEL menu with
the operational readiness symbol in the
display.
E Press the & or * button.
The operating system reads the phone
book stored on the SIM card or in the
phone. This may take more than
1 minute.
You will see the
Processing message in
the display.
E Press the & or * button repeat-
edly until you see the name you are
looking for.
The stored names are displayed alpha-
betically from A to Z, or Z to A.
i The operating system scrolls through the
names rapidly if you press and hold the & or
* button for more than one second. Releas-
ing the button stops the rapid scroll.
If you no longer wish to make a call, press the
~ button.
E Press the 6 button.
The operating system dials the select-
ed phone number. You will see the
Dialed message in the display.
The operating system stores the phone
numbers in the redial memory.
If a connection is made, you will see the
name of the person you are calling and
the call duration.
Redialing
The operating system stores the most re-
cently dialed phone numbers. This means
that you do not have to search through the
entire phone book.
E Press the V or U button repeat-
edly until you see the TEL menu with
the operational readiness symbol in the
display.
E Press the 6 button.
The redial memory shows the most re-
cently dialed numbers or names.
ee

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English