freightliner Sprinter Operator's Manual

Driving systems
132
Controls in detail
E Press the : or 9 button until the
required standard is highlighted.
E Press the t button.
The selected standard is activated.
i The video signal from the rear-view camera
uses the NTSC standard.
i If you select S and press the t but-
ton, the monitor will revert to the main menu
(menu level 1) (e page 129).
Menu language menu
You can set the language for the monitor
menu texts in the Menu language menu.
E Press the t button.
The main menu (menu level 1) is dis-
played (e page 129).
E Press the : or 9 button until the
Menu language menu is highlighted.
E Press the t button.
The languages in which the menus and
messages are to be displayed are dis-
played.
The current language is marked with
the A symbol.
E Press the : or 9 button until the
required language is highlighted.
E Press the t button.
The selected language is activated.
i If you select S and press the t but-
ton, the monitor will revert to the main menu
(menu level 1) (e page 129).
Default settings menu
You can reset the monitor to the factory
settings in the
Default settings menu.
E Press the t button.
The main menu (menu level 1) is dis-
played (
e page 129).
E Press the : or 9 button until the
Default settings menu is highlighted.
E Press the t button.
The monitor displays the following
message:
E Press the : or 9 button until the
required setting is highlighted.
O Yes: overwrite all settings with the
default values.
O S: return to the main menu with-
out applying the default values.
Monitor shutdown while driving
For safety reasons, the monitor will shut
off at speeds above 6 mph (10 km/h).
The following message will be displayed for
7 seconds prior to the monitor shutting off.

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English