Frick QUANTUM - Options Setup

Options Setup
Options that were enabled in Panel Setup are shown. The
following screens are possible:
• Condenser Control (If applicable, see
Panel Setup)
• Compressor Sequence Control or
Compressor Interlock (If applicable, see
Panel Setup)
• Input Module Capacity Control Selection
(If applicable, see Panel Setup)
• Auxiliary Setup - Shows the Auxiliary
Setup screen for the analog auxiliaries 1-2
setpoints. (If applicable, see Panel Setup)
• Suction Pull Down (If applicable, see Panel
Setup)
S90-010 O FRICK QUANTUM™ COMPRESSOR CONTROL PANEL
Page 40 OPERATION