Frick QUANTUM - Pressure Units; Temperature Units

FRICK
®
QUANTUM™ COMPRESSOR CONTROL PANEL S90-010 O
OPERATION Page 77
Pressure Units -- PSIA, PSIG, or SI
This screen allows the user to change the units that
pressures will be displayed in. The default is PSIG.
The following screen keys are provided:
[Change to PSIA]
[Change to PSIG]
[SI Units]
[Change to BarA] (Bar Absolute)
[Change to Bar] (Bar Gauge)
[Change to KPAA] (KPA Absolute)
Temperature Units -- Degrees Fahrenheit or Celsius
This screen allows the user to change the units that
temperatures will be displayed in. The default is Celsius.
The following screen keys are provided:
[Change to Fahrenheit]
[Change to Celsius]