5-140
Chap. 5 FUNCTION CODES
F codes
E codes
C codes
P codes
H codes
A codes
b codes
r codes
J codes
d codes
U codes
y codes
Block diagram
Customizable Logic (Mode selection) (U00)
U00 specifies whether to enable the sequence configured by the customizable logic function or disable it to operate the
inverter only by input terminal signals and others.
Data for U00 Function
0
Disable
1
Enable (Customizable logic operation)
Customizable Logic (Setting) (U01 to U50)
In a customizable logic, one step is composed of the components shown in the following block diagram.
Input 1
Input 2
Output
Timer
Logic circuit
General-purpose
timer
To Next Page
Loading...
