Fuji Electric FRENIC-VG Series - Page 175

6.5 SX Bus Interface Card
6-99
Chap. 6
CONTROL OPTIONS
4 Control data (CW) (Standard ＋DIOA, 16 bits)
(MSB) (LSB)
15 8 7 0
0) FWD (Run forward command)
1) REV (Run reverse command)
2) X1
3) X2
4) X3
5) X4
6) X5
7) X6
8) X7
9) X8
10) X9
11) X11
12) X12
13) X13
14) X14
15) RST (RESET command)
5 Operation status (SW)
Refer to the operation status of the standard format.
6 Pulse train position command (PG (PR)), position detection (internal or PG (PD)), position
detection (Z-phase input) (PG (PD))
Refer to the explanation of U61 - U63 in "6.4.5.1 Function Code".
Note: The PG option (OPC-VG1-PG/PGo) is necessary to reference data for the pulse train position
command and position detection (excluding internal data).
7 Position command (available soon)
8 VG DI (DIOB option: 16 bits)
(MSB) (LSB)
15 8 7 0
0) X21
1) X22
2) X23
3) X24
4) X25
5) X26
6) X27
7) X28
8) X29
9) X30
10) X31
11) X32
12) X33
13) X34
14) X35
15) X36
Note: The DIO option (OPC-VG1-DIO) is necessary to reference data for the VG DI (DIOB option:
16 bits).
0: OFF,
1: ON
0: OFF, 1: ON