Furuno MFD12 - How to Find Information about a Route on the Screen; How to Find a Route on the Chart

5. Routes
5-7
5.4 How to Find Information About a Route on the
Screen
Put the cursor on a route to get simple route information (name and length of route).
Push the left-click button to get detailed information. This information includes name
of route, length of route, no. of points, range and bearing to next point, and total time
to go.
5.5 How to Find a Route on the Chart
You can easily find the location of a route if you select the route from the [Routes List].
The route selected is put at the center of the active chart plotter display.
1. Press the MENU key to open the menu then select the [Routes] tab in the [Routes]
menu.
2. Use the RotoKey to select a route then push the key to show the Routes List pop-
up menu.
3. Use the RotoKey to select [Find/Edit on Chart].
Detailed route informationSimple route information
Rename
Detail
Est Speed
Delete
Merge
Find/Edit on Chart