Furuno MFD12 - How to Adjust the Video Image; How to Control an Axis IP Camera

9. Camera/Video
9-4
9.4 How to Adjust the Video Image
1. Long-push the RotoKey to show the soft controls that adjust the video signal.
2. Rotate the RotoKey to select [Brightness], [Colors] or [Controls] then push the
key.
3. Rotate the RotoKey to adjust the slider bar then push the key to validate your set-
ting.
9.5 How to Control an Axis IP Camera
An AXIS IP camera can be controlled from the NavNet display. Use the RANGE con-
trol to zoom in or zoom out. Scroll the camera image with the ScrollingPad.
Soft controls for
adjustment of video
(Brightness, Colors,
Contrast)