Furuno MFD12 - How to Prepare the Hot Page; How to Show the Instrument Display

10. Instrument Display
10-2
10.1 How to Prepare the Hot Page
The instrument display is available when the number of hot pages in the display
selection window is nine or ten. Select the number of hot pages to display as in the
procedure shown below.
1. Press the MENU key to open the menu.
2. Open the [My NavNet-General] menu.
3. Use the RotoKey to select [Hotpage Number].
4. Use the RotoKey to select [Nine] or [Ten] to get the instrument display.
5. Press the MENU key to close the menu.
10.2 How to Show the Instrument Display
Press the DISP key to show the display selection window. Rotate the RotoKey to se-
lect the combination display which contains the instrument display. Push the RotoKey
to show the selected display.
COMBINATION DISPLAY
with instrument display