13. How to Adjust Settings
13-5
13.1.1 How to Select the RotoKey Set to Use
You have four RotoKey sets that you can select: [Basic], [Standard], [Full], and [Cus-
tom]. Select the set to use as follows:
1. Press the MENU key to open the menu.
2. Open the [My NavNet-General] menu.
3. Use the RotoKey to display the [RotoKey] options window.
4. Use the RotoKey to select [Basic], [Standard], [Full] or [Custom]. (For [Custom],
see the next section for how to set the RotoKey.)
5. Press the MENU key to close the menu.
IP1 IP camera 1 Yes Yes Yes
IP2 IP camera 2 Yes Yes Yes
IP3 IP camera 3 Yes Yes Yes
IP4 IP camera 4 Yes Yes Yes
Vid Cycle Select video switching cycle. Yes Yes Yes
Cycle 1 Select video switching cycle 1. Yes Yes Yes
Cycle 2 Select video switching cycle 2. Yes Yes Yes
Video ID Show or hide video ID. Yes Yes Yes
Brightness Adjust brightness of video image. No No Yes
Colors Select number of colors to show. No No Yes
Contrast Adjust contrast of video image. No No Yes
Sleep Sleep the NavNet 3D equipment. No Yes Yes
Control label Level1 Basic Standard Full
To Next Page
Loading...
