Furuno MFD12 - System Menu; System-General Menu

13. How to Adjust Settings
13-15
13.5 System Menu
The [System] menu has menus for general system settings, sensor calibration, radar,
fish finder.
13.5.1 System-General Menu
The [System-General] menu selects the language to use, sets the message window
dwell time, shows the connection diagram, etc.
Language: Select the language to use. See section 1.13.
Message Window Dwell Time: Set the number of seconds to leave a message win-
dow open before the window is closed.
Connection Diagram: Display the parts of your network. For use by service techni-
cians.
GPS Status: Show the status of GPS satellites. See “14.5 GPS Status Display.”
Installation Wizard: Start the Installation Wizard to install the system. See the Instal-
lation Manual.
Reset Default Settings: Restore all default settings for your system.
NavNet 3D MFD8
|_ [COM1]Port1
|_ [COM2]Port2
|_ [COM3]Port3
DRS-RADOME
NavNet 3D MFD12