Furuno MFD12 - How to Edit a Point from the Points List

4. Points
4-8
4.7 How to Edit a Point from the Points List
You can edit the points you have entered from the [Points] menu. You can select the
point to edit on-screen, or from a Points list.
1. On the screen, use the CursorPad to select the point to edit, push the right-click
button and select [Edit] from the pop-up menu. (You can also select the point if
you long-push the GOTO/LIST key.) Settings for the point selected appear on the
right-half of the screen.
2. The [Position] combo box is selected. If necessary, change position.
3. To change the name of the point, select the [Name] box. Change the name as fol-
lows:
1) Push the RotoKey to select the character to edit then push the RotoKey.
2) Rotate the RotoKey to select an alphanumeric character then push the Ro-
toKey.
3) Repeat steps 1 and 2 to complete the name. A name can include a maximum
of 13 alphanumeric characters.
4. Select [Point Symbol] to change the point symbol. 32 symbols are available.
Point
attributes
DEC1207 125248 AM