Furuno MFD12 - Radar Overlay

3. 3D Display, Overlays
3-11
3.2.5 Radar Overlay
The radar overlay display puts the radar picture on the top of the navigation chart. To
display the radar overlay, use the RotoKey to select [Overlay] followed by [Radar].
Push the RotoKey to show or hide the radar overlay.
How to set the level of the radar echo transparency
Open the [Radar] menu and use the RotoKey to select [Echo Transparency for Over-
lay]. Rotate the RotoKey to set the level of transparency then push the RotoKey. You
can see the result of the setting on the right half of the screen.
How to match the overlay and radar ranges
Open the [Radar] menu, and use the RotoKey to set [Overlay Range Link] for On or
Off.
Echo Transparency for Overlay