6. Radar
6-13
6.10 Heading Line
The heading line indicates your heading in all orientation modes. This line connects
between your position to the outer edge of the radar display. The line is at zero de-
grees on the bearing scale in the head-up mode. The orientation of the line changes
in the north-up, course-up and true motion modes with the movement of your vessel.
To show or hide the heading line:
1. Put the cursor where there is no symbol then push the right-click button. The Ra-
dar pop-up menu appears.
2. Use the RotoKey to select [Hdg Ln Off] then push the key to hide the heading line.
The heading line remains hidden until you release the key.
To Next Page
Loading...
