Furuno MFD12 - AIS Transponder FA-30, FA-50

1. System Introduction
1-24
1.20 AIS Transponder FA-30, FA-50
The FURUNO AIS Transponder FA-30 (FA-50) installs in the NavNet network and can
be controlled from a NavNet display. To access the main menu of the transponder, do
the following:
1. Open the main menu and select the [System] menu.
2. Open the [Other Sensors] sub menu.
3. Use the RotoKey to click the FA-30 (FA-50) button to show the main menu of the
transponder.
4. Use the CursorPad to operate the menu, referring to the operator’s manual of the
AIS transponder.