Furuno MFD12 - How to Move a Point; How to Move an On-Screen Point; How to Move a Point from the Points List

4. Points
4-6
4.5 How to Move a Point
You can move a point by two methods:
• Move the symbol to a new location.
• Enter new position manually on the [Points] list.
4.5.1 How to Move an On-screen Point
1. Set the cursor on the point to move. The point becomes larger if the point is se-
lected correctly.
2. Hit the right-click button to show the Point pop-up menu.
3. [Move] is selected. Push the RotoKey.
4. Use the CursorPad to move the symbol to the new location. Push the RotoKey to
put the symbol at the new location.
4.5.2 How to Move a Point from the Points List
1. Long-push the GO TO/LIST key to open the [Points] menu then open the Alpha
list.
2. Use the RotoKey to select the point to edit.
3. Push the right-click button or the RotoKey to show the Point Edit pop-up menu.
4. Rotate the RotoKey to select [Edit] then push the RotoKey. The point information
replaces the chart.
5. The [Position] combo box is selected. Push the RotoKey.
6. Enter position with the RotoKey. Push the RotoKey to select the location. Rotate
the RotoKey to select a digit then push the RotoKey to validate your selection.
7. Rotate the RotoKey to select the OK button at the bottom of the display then push
the RotoKey.
Go To
Edit
Rename
Delete
Move
New Point
Edit
Delete
Find on Map
Position