Furuno MFD12 - 10 How to Set an Alarm

2. Chart Plotter
2-14
2.10.10 How to Set an Alarm
1. Press the MENU key to open the menu.
2. Open the [Alarms-General] menu.
3. Use the RotoKey to select an alarm item then do one of the following:
a) For the alarms which have a status icon, push the RotoKey to activate or
deactivate the alarm. Show the icon in green to activate the alarm, or gray to
deactivate the alarm.
b) For the depth, speed and SST alarms, select the combo box of the item then
push the RotoKey to show the alarm options. Use the RotoKey to select an
option.
4. Use the RotoKey to select the [Alarm Value] box for the alarm.
SST Alarm