Furuno MFD12 - How to Display Target Data; Track History Display; How to Show and Hide Target Ids

12. Automatic Identification System (AIS)
12-5
12.6 How to Display Target Data
The name, course, speed, range, bearing, etc. of an AIS target can be shown on the
display. For simple data, put the cursor on an AIS target. For detailed data, put the
cursor on the target then push the left-click button.
12.7 Track History Display
The track of AIS targets can be shown on the display. A line starts from the rear of the
target to show track history. You can select the track history plotting interval from the
[Targets] menu. See the section "6.25.8 Track History Display" on page 6-31.
12.8 How to Show and Hide Target IDs
You can show or hide the target ID (MMSI) of AIS targets. Open the [Targets] menu
and show or hide [Display Target IDs].
Name PEGASUS
COG/SOG 56.2
°T/6.8 kt
CPA/TCPA 3 m/55m03s
Range/Bearing 6.366 nm/26.7
°T
AIS simple target data
Name VOYAGER
MMSI MSN3456098
COG 56.2
°T
SOG 6.8 kt
ROT +0.7°/m
CPA 0.8593 nm
TCPA 23m08s
Range 6.366nm
Bearing 26.7
°T
Destination NISHINOMIYA
AIS Status Normal
Call SIgn HQZE4509
Beam 8.0 m
Length 30.1 m
Position 34
°37.1715'N; 135°10.2459
AIS detailed target data