Furuno MFD12 - How to Show Information about a Route; Flyover

5. Routes
5-11
5.9.4 How to Show Information About a Route
1. Put the cursor on a route leg of the active route then push the right-click button
to show the Routes pop-up menu.
2. Use the RotoKey to select [Route Info].
The display shows route information for the route selected.
• Each route point name
• Distances between points
• Bearings between points
• Time-to-go between points
• Total distance
• Bearing from the first to the last route points
• Total time-to-go
5.9.5 Flyover
The flyover feature lets you view an entire route from overhead, with the screen auto-
matically scrolled as the flyover progresses. Select the route, push the right-click but-
ton to show the Routes pop-up menu and the choose [Flyover].