4. Points
4-9
5. Select [Point Color] to change the color of the square part of the point symbol.
Seven colors are available: red, yellow, green, cyan, purple, blue, and white.
6. Select [Group] to put the point in a point group. [Fishing], [Navigation], [Danger]
and [Entertainment] are the default groups.
7. [Depth] and [Water Temperature] are the depth and water temperature at the point
location. (You need depth and water temperature data to show this data.) If nec-
essary you can change this data.
8. [Avoidance Circle Area] sets the distance for the proximity alarm, which tells you
when your vessel is near a point by the distance set here. For additional informa-
tion about the proximity alarm, see the section on the chart plotter alarms.
9. Use [Comment] to enter a comment about a point. You enter a comment like you
do a Name. A comment can include a maximum of 64 alphanumeric characters.
10. The GoTo button functions to set a point as the GoTo point. Select this button then
push the RotoKey to go to the point.
11. To finish, select the OK button then push the RotoKey.
Navigation
Danger
Entertainment
To Next Page
Loading...
