13. How to Adjust Settings
13-13
Global-General menu description
Menu item Function Options
Key Beep Activate or deactivate the key beep which sounds
when a key (incl. RotoKey) is operated.
ON, OFF
Font Size Select the font for all indications, menus and the
like. After you change the font size, the system is
reset to use the new font.
Medium, Large
Day/Night Mode Automatically set the color arrangement and bril-
liance according to time of day.
Day, Dusk, Night, Sunlight
Day Brilliance Automatically set the brilliance for the daytime
hours.
Low, Medium, High
Dusk Brilliance Automatically set the display brilliance for the
dusk hours.
Low, Medium, High
Night Brilliance Automatically set the display brilliance for the
nighttime hours.
Low, Medium, High
View Angle Change the angle of view on all displays and
menus. Select an "upward" setting to change the
angle of view to upward, or select a "downward"
setting to view from downward direction.
Most Upward, Upward, Nor-
mal, Downward, Most Down-
ward
Great Circle
Navigation
The two methods to measure the course distanc-
es are great circle and Rhumb line. Great circle is
the shortest line that joins two points on the sur-
face of the earth. Rhumb line is a straight line
compass course between two points. The great
circle path is short, but requires frequent heading
changes.
ON, OFF
Bearing Display The mode (magnetic or true) of all heading and
bearing data.
True, Magnetic
Position Format Select how to display position data, in latitude and
longitude, Loran C TDs, or MGRS (Military Grid
Reference System).
DDD.ddddddDD°M.mmmm,
Loran C, MGRS
Loran C Station
& GRI
Select the Loran C stations and GRIs to use to get
Loran C position.
Time Zone Set your time zone. GMT times zones for the
world
Daylight Saving
Time
Set for ON when your area uses daylight saving
time.
ON, OFF
TLL Output with
MOB
Set for ON to output position at the time of MOB.
Requires position and waypoint position data.
ON, OFF
Normal
Most Upward
Upward
Downward
Most Downward
To Next Page
Loading...
