Revision 1 155 9/10/2019
Customer Information
Customer:
Address:
City: Province / State
Zip/PC: Country:
Contact: Phone:
P.O. No: S.O. No:
Analyzer/ Sensor Serial Number, Software/Firmware Revisions
Analyzer S.N: Sensor S.N:
G.U.I. Version: Firmware Version:
Rosetta Version: Sensor Firmware Version:
Issued: Completed:
Included Options
Sample System: Yes No Enclosure: Yes No
Gauge Make: GO PR-1 Gauge Range: 0-30 psig
Filter Type: BA0075 Filter Element: MC0477
Set: 15 psig
Chassis Flow Meter: BA0328 T.S. Flow Meters: BA0071
Auto-Cal Solenoid: Yes No
Flow Meters Set Up
Sample Set At: 0.5 On Tube Scale
Global Setting
Area Classification Class I, Div. 2 Groups B, C, D Class I, Div. 1 Groups B, C, D
Voltage Input AC DC DC Back Up
Analysis Type Standard Timed
Synchronize the Analyzer Time and Date.
Aperture Strip Size inches
Pulse Counter Capstan Diameter Measured inches
Number of Pulses on Tape Advance
Live Sensor LED Current mA
Amount of tape used reset: 300 Feet
Calibrate the Analog outputs
Wipe Archive and Event logs before shipping
Bypass Timeout Enabled? YES / NO
If Yes… Bypass Timeout Length Seconds
Furnace Pulse width %
To Next Page
Loading...
