EasyManua.ls Logo

Galvanic Applied Sciences ProTech903W - Page 156

Galvanic Applied Sciences ProTech903W
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision 1 156 9/10/2019
Stream Setting
Stream 1
Phosgene Range ppm
High Alarm 1 Set point ppm
High High Alarm 2 Set point ppm
AO # 1 Range AO # 2 Range AO # 3 Range
AO # 4 Range AO # 5 Range AO # 6 Range
Sample Delay Seconds
Sample Interval Seconds
TSC (mV) for Sample Run
TSC (mV) for Calibration Run mV
TSC (mV) for Reference 1 Run mV
TSC (mV) for Reference 2 Run mV
TSC (mV) for Zero Run mV
High Alarm Enabled Relay # Solenoid #
Deviation Enabled Relay # Solenoid #
High High Alarm Enabled Relay # Solenoid #
High-High Alarm Duration Enabled Relay # Solenoid #
Lock Stream Alarm Enabled ppm
Final Check and Calibration
Primary calibration with ppm Phosgene test gas
Charted for Hours
Chart included
Gain Zero Offset
Phosgene spanned at __ mV at __ % of full scale __ mV at __ % of full scale
Calibration Technician:
Date of Calibration:

Table of Contents

Related product manuals